RightFit Tallahassee Insulation ServicesRightFit Tallahassee Insulation Services

Proven Insulation Contractor in Tallahassee FL - Sealed Attics and a Cooler Upstairs

RightFit Tallahassee Insulation Services adds attic insulation and seals the drafts behind a hot upstairs in Tallahassee, Bradfordville and Quincy. We also lay vapor barriers in damp crawl spaces and clear out old, soiled insulation.

Request an estimateCall (850) 222-9906
Services
16
Service areas
4
Unfinished interior framing with cream spray foam covering the walls and ceiling.

Book an insulation estimate at your home

We look at the attic or crawl space first, so you know what's there before a number.

Request an estimate

Insulation contractor work in Tallahassee, FL

RightFit Tallahassee Insulation Services is the insulation contractor Tallahassee homeowners call when the upstairs won't cool down, the floors run cold or the power bill keeps creeping up. We handle 16 kinds of insulation work, from topping up an attic to foam, crawl space vapor barriers and clearing out old material. The price mostly turns on how many inches are already up there and what shape they're in, what has to come out first, and whether foam or loose fill suits the house. The schedule turns on the same things, plus any leak or damp spot that has to be fixed before we cover it up. I look at the space in person and go over what I found before you see a number.

  • White spray foam fills the roof and wall cavities of an exposed timber frame.

    Spray foam insulation

    Spray foam goes on wet, swells into every gap and seals air while it insulates. It costs more than sealing the gaps and topping up loose fill, which usually wins, but foam earns its keep when the ductwork runs through the attic.

  • A worker in gloves and a respirator fits fiberglass batts between attic rafters.

    Attic insulation

    Hot upstairs or a climbing power bill? We check how many inches are already up there, fix what's wrong underneath, then bring the attic up evenly, out to the edges instead of piled in the middle.

  • Loose-fill insulation covers an attic floor beneath exposed rafters and a skylight.

    Blown-in insulation

    Blown-in is loose fill sent through a hose, and it's the quickest way to top up an attic without tearing out what's still good. We keep the eave vents clear so the attic keeps breathing.

  • A worker in protective coveralls sprays foam insulation into exposed wall cavities.

    Home insulation

    We look at the attic, walls and crawl space together and tell you which one is costing you the most. It's for owners who know the house is drafty but can't tell where it's coming from.

  • A worker in protective gear vacuums loose insulation from an attic with a large hose.

    Insulation removal

    If what's up there got soaked by a leak or filled with droppings, new material on top just buries the problem. We bag it out, clean up and leave the space ready for fresh insulation.

  • Crawl space with a white vapor barrier covering the floor, brick piers, and large silver and black ducts beneath wooden joists.

    Crawl space insulation

    Cold floors usually trace back to the crawl space. We insulate under the floor once we know the space is dry, because insulation in a damp crawl space just holds the water against your framing.

  • Large building interior with white insulation covering the walls and roof, exposed reddish-brown trusses, and lumber stacked on the floor.

    Wall insulation

    Outside walls cold to the touch, or a room over the garage that never settles? We fill the empty wall cavities, usually through small holes we patch afterward, so you don't lose your rooms to a remodel.

  • Attic framing coated in thick white foam around ducts, pipes, and wiring.

    Air sealing services

    Air sealing means closing the gaps around pipes, wiring, ducts and outlets through the house before any insulation goes in. Skip it and the new insulation spends its whole life fighting a draft.

  • Basement with gray insulation between wooden wall studs, exposed concrete below, and a metal duct overhead.

    Basement insulation

    Have a basement or a below-grade room that stays clammy? We check for moisture first, then insulate the walls with material that can live next to concrete.

  • Open attic with white foam insulation coating the sloped roof around exposed wooden trusses and framing.

    Closed-cell foam insulation

    Closed-cell foam is dense foam that blocks moisture as well as heat, which suits rim joists, crawl space walls and other spots that see damp. We plan the job around your household, from where everyone stays to any health concerns, and tell you the re-entry time, when it's safe to come back in.

  • Open-cell foam insulation fills the walls and rafters of a wood-framed room, with a black HVAC duct and yellow wiring visible.

    Open-cell foam insulation

    Open-cell foam is the lighter, softer kind, and it costs less than closed-cell. It's often sprayed under the roof deck so the attic, and any ducts in it, stay closer to indoor temperature.

  • A worker in white protective coveralls applies spray foam insulation to the metal wall of a large commercial building.

    Commercial insulation

    Property managers call us when a building needs the insulation job planned out properly. We work out access, order of work and which areas stay in use, so the building keeps running while we're there.

  • A crawl space has white vapor barrier covering the floor and lower walls beneath exposed joists, ducts, and pipes.

    Crawl space vapor barrier

    A crawl space vapor barrier is a heavy plastic sheet laid over the dirt to keep ground moisture out of your floor and framing. We put it down before any insulation goes under the house, so the new work starts dry.

  • White vapor barrier lines the floor and walls of a crawl space beneath exposed wooden joists and metal ductwork.

    Vapor barrier installation

    Not every barrier goes in a crawl space. We install vapor barriers in walls, attics and other spots where damp air needs stopping before it reaches the framing.

  • Pink fiberglass batts fill the floor joist bays of an attic beneath exposed wooden roof framing and a large metal duct.

    Attic air sealing

    Before we add a single inch up top, we seal around the can lights, pipes, wiring and the attic hatch. It's the cheap part of the job that decides whether the rest of it works.

  • A masked worker blows loose gray insulation through a hose across the floor of a wooden attic.

    Retrofit insulation

    Retrofit means adding insulation to a house that's already built and lived in, where it's thin, without tearing out what's still doing its job. Often that's the smaller fix, and we'll tell you when it is.

Who we are

RightFit Tallahassee Insulation Services is a licensed and insured insulation contractor based in Tallahassee, FL. I grew up on a farm where you fixed what broke yourself, learned this trade on other people's crews and started the business in 2017. Today we handle 16 kinds of insulation work across 4 cities, and the rule hasn't changed: what's underneath has to be sound before we cover it up. You can read more about how we work.

About RightFit Tallahassee Insulation Services
  1. 2017Established
  2. 9Years in business
  3. 16Services
  4. 4Service areas
  5. Licensed and insured.
  6. Free on-site estimates.
  7. Replies within 1 business day.

What insulation work looks like

Use the arrows to browse the images.

Why homeowners pick our crew

  • Problems fixed before insulation goes in

    We look for roof leaks, damp crawl spaces, soaked or soiled old insulation and buried eave vents, and we sort those out first. New insulation over an old problem is fresh paint on a rotten fence board, and I'd rather tell you about it than sell you more material.

  • The owner quotes it and checks it

    The person who writes your estimate is me, and so is the person who checks the finished work. Our own crew does the install in between, so there's no handoff to a stranger between the quote and the job.

  • City or county permits, sorted first

    Inside Tallahassee city limits, the city requires a permit for repairs and alterations over $7,500 in labor and material, and outside the limits a different office covers your address. We find out which side of the line you're on and handle the paperwork when the job needs one.

Tell us what's going on up in the attic or under the house through the contact form, or call (850) 222-9906.

Request an estimate

Based in Tallahassee, FL

Request an estimateCall (850) 222-9906
Location
Tallahassee, FL 32301
Hours
Mon–Fri: 8 AM–11 PM, Sat–Sun: 6 AM–10 PM
Direct
(850) 222-9906support@tallahasseeinsulationcontractor.com

What happens after you call

  1. Call or send a message

    Call (850) 222-9906 or use the form, and tell us what you're noticing: a hot upstairs, cold floors, a power bill that won't quit climbing or a musty smell from the crawl space. We reply within one business day to set up a time for me to come out.

  2. I look, then you get a number

    I go up in the attic or under the house and tell you what I see, including anything that should be fixed before insulation goes in. Then you get a free estimate with no obligation, so you can think it over without anyone leaning on you.

  3. Our crew does the work

    If you go ahead, our own crew does the install, prep first. Leaks, damp spots and soiled old material get dealt with before anything new goes down, the gaps get sealed, and the vents at the eaves stay open so the attic keeps breathing.

  4. We look it over together

    Before we pack up, I walk the job with you and show you what we did and why. Satisfaction guaranteed on every job, so if something doesn't sit right with you, that's the time to say so.

Cities we serve around Tallahassee

RightFit Tallahassee Insulation Services is based in Tallahassee, FL, and works in the cities around it, including Bradfordville and Crawfordville. The 4 cities below each have their own page, and if yours isn't listed, call and ask.

Tell us about your attic, walls or crawl space

Send the form or call, and we'll reply within one business day to set up a visit. I'll come look at the space myself and go over what I found before you get a number. The estimate is free, and there's no obligation to go ahead.

Phone
(850) 222-9906
Email
support@tallahasseeinsulationcontractor.com
Location
Tallahassee, FL 32301
Hours
Mon–Fri: 8 AM–11 PM, Sat–Sun: 6 AM–10 PM
(850) 222-9906Request an estimate