Insulation Contractor in Tallahassee - Cooler Upstairs, Problems Fixed First
RightFit Tallahassee Insulation Services is an insulation contractor in Tallahassee, FL. We insulate and air seal attics, walls and crawl spaces, and we deal with what's wrong underneath, like damp or droppings, before new insulation goes in.
Get your Tallahassee attic looked at
I climb into the attic or crawl space myself, so you hear it straight.
Request an estimateTallahassee: older attics and damp crawl spaces
Most of our calls in Tallahassee start the same way, with an upstairs that won't cool down or a power bill that keeps creeping up. The houses run from older homes close to downtown, some with only a few inches left in the attic, to ranch houses and newer subdivisions farther out, plus plenty of rentals that property managers want planned out properly. North of town in Bradfordville the calls sound a lot alike, but every house still gets its own look.
What's under the house matters as much as what's on top. A lot of older Tallahassee houses sit over crawl spaces that stay damp, or have attics where an old roof leak left the insulation matted, and laying new material over either just hides the problem. My dad used to say you don't paint over rot, so the first thing I do is look at what's already there.
What we know from working in Tallahassee
Inside the city limits, building permits come from the city's Building Inspection Division, and if your job needs one, its review runs 5 work days for a minor residential project under $25,000 and 14 work days for a major one over $25,000, so that's time on the calendar before we can start. We find out whether your address is inside the city limits or out, check with the office that covers it and handle the paperwork when a permit's needed. The city doesn't issue business licenses, so there's no city license to look up on a contractor, though county, state or federal agencies may require one. We're licensed and insured, and you're welcome to ask for proof before we set foot in your attic.
We do the same work in Crawfordville and Quincy, and a Tallahassee job runs the same way. Price moves with what we find up there and how much has to happen before new insulation goes in, and the schedule turns on any permit review, any old material that has to come out and how tight the space is to work in. Your own number comes from the estimate, after I've been up there and gone over what I found with you.
Services in Tallahassee, FL
Attic insulation
Plenty of older Tallahassee attics are down to a few settled inches, piled deep in the middle and thin at the edges, which is backward. We check what's already there, then bring it up evenly out to the eaves without burying the vents.
Attic air sealing
A hot upstairs usually traces back to gaps around can lights, pipes and the attic hatch that let attic air leak down. We close those gaps before any insulation goes in, so the new material isn't fighting a draft.
Insulation removal
When an old roof leak soaked the insulation or critters moved in, fresh material on top just keeps the problem around. We bag the old stuff out, and I'll tell you if a leak still needs fixing before anything new goes in.
Spray foam insulation
When the ductwork runs through a hot attic or the room over the garage won't cool down, spray foam insulation seals air while it insulates. It's the bigger spend, so I suggest it where the ducts or that room make it worth it.
Crawl space vapor barrier
Older raised houses here often sit over bare ground that keeps the crawl space damp and the floors cold. We lay a vapor barrier over that ground so the moisture stays down there instead of working into the floor framing.
Commercial insulation
Property managers with rental houses and small buildings around Tallahassee need the job planned out properly so nobody's left guessing. We walk the building, lay out what each unit needs and work around the tenants living there.
Get a free on-site insulation estimate in Tallahassee
We reply within one business day to set a time. I come out to your Tallahassee house myself, look at the attic or crawl space and go over what I found before you get a number. The estimate is free, with no pressure and no obligation.
- Phone
- (850) 222-9906
- Location
- Tallahassee, FL 32301
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 6 AM–10 PM
- Credentials
- Licensed and insured.
What Tallahassee homeowners can count on
We're based right here in Tallahassee, FL, and we cover 16 services across 4 cities. Every job starts with a free on-site estimate.
- Based in
- FL
- Tallahassee
- Services
- 16
- Service areas
- 4
- Licensed and insured.
- Free on-site estimates.
- Replies within 1 business day.
Frequently asked questions
Do I need a permit to insulate my attic in Tallahassee?
It can need one, and the city's rules turn on what the job costs and what else it touches, since its permit list doesn't name insulation by itself. The city requires a permit for alterations or repairs with an estimated labor and material cost over $7,500, and separate trade permits when ductwork is moved or changed out or electrical circuits are added. I check the city's permit rules against your job and tell you at the estimate which of these apply.
Who issues building permits outside Tallahassee city limits?
For properties outside the city limits, the city refers owners to the Leon County Development Services Department at 850-606-1300. The city's permit pages mark an address "In" or "Out" of the limits, so that's worth knowing before you call anyone, and it's the first thing we look up too.
How much does it cost to insulate an attic in Tallahassee?
The cost comes from what's up there now and what has to happen before new insulation goes in, so I give you a number after I've seen it. An open attic with a few inches already down is usually the least work, while old material that's wet or full of droppings has to come out first and adds to the bill. A cramped attic, lots of gaps to seal and a switch to foam all push it up.
What is the best way to insulate an attic in Tallahassee, spray foam or blown-in?
For most Tallahassee attics, sealing the gaps and topping up with blown-in, loose fill blown through a hose, does the job for less money. Foam costs more because it seals air while it insulates, and it earns that when the ductwork lives in the attic, since foaming the roof deck keeps those ducts out of the worst heat.
What causes the upstairs to stay hot in a Tallahassee house?
Usually it's thin or uneven attic insulation plus gaps around can lights, pipes and the hatch that let hot attic air leak into the rooms below. Insulation pushed over the eave vents is another common one, because the attic can't breathe and moisture starts showing in the framing. We air seal first, closing those gaps, then keep coverage full out to the edges, where it's usually thinnest.
How long does attic insulation take, and do we have to leave the house?
With blown-in work you can usually stay home, and how long the crew spends up there depends on the attic's size, how tight it is and whether old material comes out first. Spray foam is different, because you, the kids and the pets need to be out until the re-entry time, when it's safe to come back, has passed. I'll give you that time and the plan before the job goes on the calendar.
Service areas
Plan your Tallahassee insulation job with us
Call (850) 222-9906 or use the form, and we'll find any leak or damp spot before it gets covered up.